Drill Rigs Drills Drilling Rigs Drill Parts Drill Bits Higgins Rig Co When Buying Or Selling Water Well Drilling Equipment Perforadoras Barrenas Rotatorias

	Higgins Rig Company
UPTIME . . . . the key to your operation. -Quality Machinery To Increase Your Profits-

Higgins Rig Co.
2594 Stiles Ford Rd.
Hodgenville, KY 42748. USA
Telephone: 270-325-3300
Telefax: 270-325-3405

ROTARY SECTION

H - I

Home Catalog Index Rotary Drills Bucket Rigs Cable Tool Rigs Oilfield Equip. Misc. Items Pump Hoist Water Trucks Parts & Components Jiffy Form Pics Of Month New Pipe & Equip. Trailers Spanish Index Spanish Oilfield Freight Forwarding Wanted Equip. Contact Us

Thank You For Visiting this section of the Higgins Rig Co Catalog. The Pictures of the drilling Equipment Can Be Enlarged By Clicking On The Picture Or The Drill Rig #. If you require further pictures, more information or you do not see a drill that meets your needs please feel free to contact us in one of the following ways:

Jiffy Form
E-mail
Call toll FREE (800) 292-7447

Rotary #121020
92 Ingersoll Rand A2000 / T2
3 X 4 Mission Magnum Mud Pump, PTO, NO Deck Engine. 20K FT./ LBS. Torque, Two Motor Tophead, 4 1/2" Pipe Setup, Fold Out Mud Pit, Pipe Rack, Single Rod Holder, (4) Hyd. Leveling Jacks. Mounted On 92 GMC Topkick, w/ 3116 Cat. Good Condition. Very Good Tires - 75% Rubber. Drill Pipe Available At An Additional Cost. Also Available At An Additional Cost Is A 3 Axle Self Contained Mud Unit With A Cummins Diesel Engine, 600 Gallon Tank, 350 GPM. Good Condition.

Rotary #2020476
1985 Ingersoll Rand DM25
750/300 Compressor, KTA19 Cummins Deck Engine. Multi Pass Unit, 5 Rod Carousel Loaded W/ Steel. Mounted On Tracks. Good Condition.

Rotary #21000
2002 Ingersoll Rand RD20
1250/350 Compressor, QSK-19 Cummins Deck Engine. Range III Derrick, Approx. 15,000 Hrs., Hyd. Leveling Jacks, 120,000 LBS. Pullback, Spur Gear Topdrive, DHD Lubricator, 25 GPM Water Injection Pump, Single Rod Loader, Catwalks, Derrick Lights, Rebuilt 9 Spool Valve, 5,000' Of 4 1/2" X 2 7/8" X 30' Drill Pipe, 2,500' Is Brand New. Includes Standard Hand Tools. Mounted On 2002 5-Axle Carrier, w/ L-10 Cummins. Good Condition.

Rotary #20750
2000 Ingersoll Rand RD20
1070/350 Compressor, QSK Cummins Deck Engine. Range III Derrick, Deck Engine Replaced New In October 2006 W/ Approx. 4,000 Hrs. Drill time, New Main Pumps, Fan Motors, Fan Pump, Two Spool Valve & Main Control Valve Replaced Fall 2007, Whisperwatt 15 Generator Mounted Behind Cab For Doghouse Power, Includes (2) 2006 Sullair 1150/350 Auxiliary Compressors P/B Cat Engines Mounted On Trailer W/ Approx. 5,000 Hrs, Doghouse W/ Porch & 3,000 Gallon Fuel Cell Mounted On 40' Trailer, (2) Pipe Tubs W/ Tugger Winch Mounts, 2' Subbase Single Unit W/ Fold Down Ramp, 3,500' Of Range II 4 1/2" Drill Pipe, 12" & 8" CenterRock Hammers W/ Stabilizers, Subs, 3,000# Regan BOP & Airbow, Hydraulic Tugger Winch, Air Slips, Working Rig. Mounted On 2000 4-Axle CCC, w/ Cummins. Good Condition.

Rotary #20713
1999 Ingersoll Rand T3W
900/350 Compressor, 3406 Cat Deck Engine. Approx. 10,189 Hours, 32,000 Lb. Pullback, 18K Lb. Main Winch, Single Rod Loader, Hammer Oiler, 420' Of 4 1/2" Drill Pipe, Rod Rack, Jib Boom, Water Injection Pump, (4) Hydraulic Jacks. Mounted On 1999 International, w/ C-10 370HP Cat. Very Good Condition.

Rotary #21003
95 Ingersoll Rand T3W
900/350 Compressor, 4 X 5 Centrifugal Mud Pump, 3406 Cat Deck Engine. 18,000 LB. Winch, 18 GPM Inj. Pump, 3 1/2" Rod Setup, Carousel, (4) Hyd. Leveling Jacks, Compressor has Clutch To Disengauge, Includes 1,200' Of 3 1/2" Drill Pipe, Hand Tools, Standard Pullback. Mounted On 95 Int'l Paystar, w/ Diesel. Good Condition.

Rotary #120591
1991 Ingersoll Rand T3W
825/350 Compressor, KTA 19 Cummins Deck Engine. Casing Hammer Derrick, 29K Lb. Pullback, 18K Lb. Winch, 18" Table Opening, Sandline, 7 Rod Carousel, Rod Rack, 4 1/2" Pipe Setup, (4) Hydraulic Leveling Jacks, 10 GPM Bean Injection Pump, Hammer Oiler, All Hand Tools, 8 Speed Fuller Transmission In Truck W/ Lo-Lo, Approx. 9,000 Hrs. On Rig & 66K Miles On Truck. Mounted On 1991 International Paystar, w/ 350 Cummins. Good Condition.

Rotary #20849
1995 Ingersoll Rand T3W
900/350 Compressor, 3406 Cat Deck Engine. Casing Hammer Derrick, 7 Rod Carousel, 18 GPM Inj. Pump, Hammer Oiler, (4) Hyd. Jacks, 520' Of 4 1/2" Pipe, 5", 6" And 8" Hammers, 1,000 Hrs. On Deck Engine, 2500 Hrs. On Hydraulics, Approx. 10,000 Total Hrs. Mounted On 1995 Ford 9000, w/ 425 HP Cat. Good Condition.

Rotary #20942
84 Ingersoll Rand T4W
900/350 Compressor, 12V71 Deck Engine. 70K Lbs. Pullback, (2) Winches, (3) Carousels, 9 GPM Bean Pump, Hammer Oiler, 300' Of 4 1/2" Pipe, All Hand Tools, (2) Stabilizers. Mounted On 82 CCC, w/
3208 Cat.

Rotary #20851
80 Ingersoll Rand T4W
900/350 Compressor, KTA19C Cummins Deck Engine. 1000' Of 4 1/2 X 3 1/2 X 25' Drill Pipe, Atlas Copco Surface And Down Hole Hammers, Chain Wrench, Cold Start Pre-Heat System, Carousel, Oiler, (3) Hyd. Jacks, Injection Pump, 225 Miller Bobcat Welder, International S1700 Support Truck With Diesel Engine, 5 Speed With 2 Speed Rearend, 4 Underbed Tool Boxes And Box On Deck. Mounted On 80 CCC, w/ L10 Cummins. Good Condition.

Rotary #120225
81 Ingersoll Rand T4W
900/350 Compressor, 12V71 Detroit Deck Engine. 500 Hours On New Deck Engine, 37,500 Pullback, Worm Gear, 300' Of 4 1/2" Drill Pipe, 6" Hammer, 25 GPM Cat Injection, New Holte Oiler, (2) Carousels, Standard Tools, 19K Miles On Carrier, 13 Speed Roadranger W/ Jake Brake, One Owner Machine. Mounted On 81 CCC, w/ 6V71. Very Good Condition.

Rotary #20877
1986 Ingersoll Rand T4W
900/350 Compressor, KT19C Cummins Deck Engine. 4843 Miles On Carrier, 450 Hrs. On Rebuilt Deck Engine, 70K Pullback, Diesel Heater, Dual Carousels, 300' Of Drill Pipe, 6" And 8" Hammers, Jake Brakes. Mounted On 1986 CCC, w/ L10 Cummins. Good Condition.

Rotary #120877
1991 Ingersoll Rand T4W
900/350 Compressor, KT19C Cummins Deck Engine. 70K Pullback, 620 Hrs. On Rebuilt Engine, Diesel Heater, Dual Carousels, 300' Of Drill Rod, 6" And 8" Hammers, Jake Brakes. Mounted On 1991 CCC, w/ L10 Cummins. Good Condition.

Rotary #20914
1991 Ingersoll Rand T4W
1050 / 350 Compressor, KTA19 Cummins Deck Engine. Fresh Rebuild On Deck Engine, Approx. 1000 Hrs. On Rebuilt Compressor, Lots Of Repairs, 7 Rod Carousel, Hammer Oiler, Water Inj. Pump, (3) Hyd. Jacks, Worm Gear Head, 50K LBS. Pullback, Includes 95 Mack Rod Truck, 60 Pieces Of 4 1/2" Pipe, Stabilizer, Hammer, Bits, BOP, Hand Tools. Will Sell As A Package Or Separate. Mounted On 1991 CCC, w/ Cummins. Very Good Condition.

Rotary #120851
1996 Ingersoll Rand T4W
1050/350 Compressor, QSK19C Cummins Deck Engine. Angle Drill Package, 50K Lb. Pullback, Worm Gearhead, 1000' Of 4 1/2 X 25' Pipe, 25 GPM Bean Inj. Pump, (2) 6" Hammers, Hammer Oiler, (2) Carousels, Double Jib Booms, (3) Hyd. Leveling Jacks, 225 Amp Miller Welder.Mounted On 1996 CCC, w/ L10 Cummins. Good Condition.Includes 1975 Peterbuilt With 1800 Gallon 20' Flat Tank, Peterbilt Has 350 Cummins With Jake Brake And 13 Speed Fuller Transmission.

Rotary #20674
2003 Ingersoll Rand T4W
1070/350 Compressor, PTO, Cummins Deck Engine. 50K Pull Back, 1800' Of Drilling Pipe, All Hand Tool's & Subs, Approx. 3800 Hours On The Machine And 36,000 Approx. Miles On Carrier. Mounted On CCC, w/ C12 CAT. Good Condition.

Rotary #120664
Ingersoll Rand/Cyclone TH50
IR Dev. Compressor, 4 X 3 Mud Pump, V8 Ford Gas Deck Engine. Angle Package, Rod Rack, (3) Hyd. Jacks, Kelly Bar, Cathead. Mounted On International, w/ V8 Diesel. Good Condition.

Rotary #1928
77 Ingersoll Rand TH55
50 SDS Leroi Compressor, 3 X 4 Mission Mud Pump, PTO, No Deck Engine. 220' Of 3" Flush Joint Drill Stem, Bean Injection Pump, Rod Rack, New Hydraulic Pump In 2000. Mounted On 78 International Loadstar, w/ DT466 Diesel. Good Condition.

Rotary #120316
79 Ingersoll Rand TH55
600/250 Compressor, 5 X 6 Mud Pump, PTO, NO Deck Engine. (3) Hyd. Leveling Jacks, Rod Rack, Bean Injection Pump, 3 1/2" Rod Setup, Jib Boom, Air Operated Mud Pump 1 Year Old. Field Ready. Mounted On 79 International, w/ 6V71. Good Condition.

Rotary #20528
93 Ingersoll Rand TH55M
300/200 Compressor, 4X3 MCM Mud Pump, PTO, NO Deck Engine. 9 Rod Carousel, Water Injection, Sand Reel, Jib Boom, 3 1/2" X 20' Rods 2 3/8" IF, Rebuilt Bowie Grout Pump, New Gauges As Needed, New Air Cylinder On Flat Wrench, Several Other Repairs Done To Machine. Mounted On Ford, w/ Diesel. Good Condition.

Rotary #20981
78 Ingersoll Rand TH60/36
450/250 Leroi Compressor, 3 X 4 Mud Pump, PTO, NO Deck Engine. 400' Of 3 1/2" IF Rods, Stabilizer, Subs, Mud Pan, 5" Hammer, Misc. Tooling, Rod Rack, (3) Hyd. Leveling Jacks, Minor Hyd. Leaks, Overall In Good Shape. Mounted On 78 Int'l Paystar, w/ 8V71 Detroit. Good Condition.

Rotary #21020
99 Ingersoll Rand TH60
825/350 H2 Compressor, 3 X 4 Mission Magnum Mud Pump, PTO, NO Deck Engine. Approx. 5,000 Hrs. On Compressor, 2,000 Hrs. On In-Frame Engine Rebuild, 32,500 LB. Pullback, 18,000 LB. Winch, Sandline, 25 GPM Cat Inj. Pump, 7 Gallon Oiler, 7 Rod Carousel, 4 1/2" Pipe Setup, Rod Rack, (4) Hyd. Jacks. Mounted On 99 Int'l Paystar, w/ 565 HP Cat. Very Good Condition. Also Available At An Additional Cost Is A 3 Axle Self Contained Mud Unit With A Cummins Diesel Engine, 600 Gallon Tank, 350 GPM. Good Condition.

Rotary #20607
86 Ingersoll Rand TH60
750/250 Compressor, PTO, No Deck Engine. 740' Of 4 1/2" Pipe, 11 1/2" Stabilizer, Rod Rack, Carousel, 18 GPM Bean Injector, Oiler, Cotta Box Rebuilt 1 Year Ago, New Style 4 Motor Tophead, Truck Engine Rebuilt 4 Years Ago, Truck Has Jake Brake. Mounted On 85 GMC General, w/ 8V92 Detroit. Very Good Condition.

Rotary #20692
74 Ingersoll Rand TH60
600/250 Compressor, 4X2 Mud Pump, PTO, NO Deck Engine. 14 Speed Spicer, 7 Rod Carousel, Rod Rack, Bean Injection Pump, 240' Of 4 1/2 Pipe, Transfer Case Had Been Rebuilt, 3 Hyd. Jack, Stabilizer, Bits Mounted On 74 Dodge 9000, w/ 230 Cummins. Fair Condition.

Rotary #20706
1985 Ingersoll Rand TH60
750/250 Compressor, PTO, No Deck Engine. 38' Derrick, Recent Repairs Include New King Head, New Hyd. Pump, New Three Motor Gear Box, New Hyd. Motor Cylinder & Gearbox For Carousel, New Clutch & Bearings On Compressor, New Clutch On Truck Engine, New Cables Except For Winch Line, New U-Joints, Rebuilt Pipe Rack, 1550 Hours On Engine, Valve Bank Needs Work. Mounted On 1985 International Paystar, w/ Detroit. Good Condition.

Rotary #12518
2001 Ingersoll Rand TH60
825/350 Compressor, 3 X 4 Mission Mud Pump, PTO, No Deck Engine. 10 Speed Spicer Transmission, 32' Derrick, 9 Rod Carousel, 18 GPM Bean Water Injection, 18,000 Lb. Winch. Mounted On 2001 Paystar 5600, w/ C15 Cat.

Once again we thank you for visiting this page of our catalog. Please be sure to contact us for more information on our drilling equipment. Please check this page out frequently as we list new drill rigs daily. If you have drilling equipment that you would like to list with us please feel free to submit your listings using one of the following methods:

Jiffy Form
E-mail
Call toll FREE (800) 292-7447

Thank you for the opportunity to share our drilling equipment with you. We look forward to serving you and your fine company!

Call for More Details 1-800-292-RIGS

Disclaimer:
The Company offers the details of these vessels in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessels. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. These vessels are offered subject to prior sale, price change, or withdrawal without notice.